home Reviews How to remove the password on Windows 7 if you forgot it. If you suddenly forgot your Windows password: Break the password! Here's what you need to do

How to remove the password on Windows 7 if you forgot it. If you suddenly forgot your Windows password: Break the password! Here's what you need to do

What to do if you forgot your computer password? This guide will tell you what to do if you forgot your Windows password and how to solve this problem without reinstalling the operating system. We'll also look at other possible password issues. The Windows 10 and Windows 7 operating systems have improved security capabilities compared to the earlier Windows XP/2000 systems.

By the way, your PC may have one of the most commonly used passwords installed; for a complete list of popular passwords, see -.

The latest versions of Windows use a more effective password system designed for business use to ensure that no one without the necessary permissions can access information on your computer. This is a double-edged sword. Most users forget some important password at least once. And then the user/owner of the information becomes the “enemy without access rights” for his computer.

Naturally, for every security method there is a way to bypass it, especially if you have physical access to the computer.

In this article, we will look at various methods of protecting your computer with a password and how to bypass them. We won't start with user account passwords, but with equally important passwords, such as BIOS passwords.

How to "bypass" the BIOS password?

BIOS password- one of the oldest methods of protecting a computer from unauthorized access and one of the most common. Why? This is one of the most effective means if the user does not have access to the system unit. Otherwise, it is the same as locking your house with many locks and leaving the window open.

The default BIOS settings on all motherboards do not store password information. So all you need to do to remove the BIOS password is simply reset the current settings, restoring the default configuration. But remember that resetting the current BIOS settings will destroy not only the password, but also all the settings that you set yourself.

There are two ways to reset BIOS settings. Most motherboards have a special jumper for clearing CMOS (the memory in which BIOS settings are stored). Usually this jumper is located near the battery on the motherboard, but to be completely sure, it is advisable to refer to the instructions from the motherboard. On some motherboards, instead of a jumper, there are simply two contacts that need to be closed with a metal object, such as a screwdriver, to reset the CMOS.

If your board has a jumper, then to clear CMOS, turn off the computer, install the jumper so that it closes the jumper contacts, and press the computer power button. Your computer will not boot, but your CMOS settings will be reset. Remove the jumper and turn on the computer again. You will most likely see a screen asking you to press F1 to set the BIOS settings. If you are happy with the default settings, press F1 and select ‘Save and exit’ from the BIOS menu. After this, the computer will boot as usual, except for the BIOS password.

If you don't know where the required jumper is located on your board or if it doesn't exist at all, which is quite possible, you'll have to go a different route. Each motherboard has a battery that powers the CMOS memory, allowing it to store information. As a rule, this is a standard CR2032 battery.

To clear CMOS, turn off the computer and remove the battery (you may need a thin screwdriver). After 5-10 minutes, replace the battery and turn on the computer. The BIOS will be set to default settings and there will be no password. To continue booting, you will need to press the F1 key, and if you are satisfied with the default settings, select the ‘Save and exit’ item in the BIOS menu that appears.

As you can see, all this is very simple on a desktop computer, but with a laptop, the BIOS password can become a serious problem. Due to the frequent theft of laptop computers, manufacturers have made it almost impossible to gain access without passing the password. So, if you have forgotten your laptop's BIOS password, most likely you will have to contact the manufacturer's service center.

What to do if you forgot your Windows password?

If circumstances have developed in such a way that you have forgotten your Windows password, then we recommend that you reset it using the built-in account called Administrator. This is done in safe mode, while booting or rebooting your PC.

To restore access to your computer, you will just need to press F8 and in the menu that has already opened, in which you will be presented with some additional options for loading your operating system, you will have to select the aforementioned “Safe Mode”. Next, you will need to select a built-in account, which, by the way, by default, cannot be protected by any password.

If you did everything correctly, since you strictly followed the above sequence of actions, then while still on the Desktop, you should see a window with a message that Windows is running in the “Safe Mode” you need, which is as simplified as possible. You will need to click “Yes” and go to Control Panel - User Accounts, where there is an icon for the account for which you want to reset the password. On the left, you must select “Change Password” and in the appropriate window enter and then confirm a new password. Ultimately, you will need to restart your PC for the above changes to take effect.

How to crack Windows password on a computer or laptop?

In order to do this, you will have to follow the following sequence of actions:

Prepare a CD or flash drive on which a special set of recovery programs intended to restore Windows should be recorded. You will need to insert it into the drive or into the appropriate port during the subsequent reboot of the computer. You can prepare this package of resuscitation programs yourself by downloading programs intended for separating, saving and restoring data, or you can download some ready-made RBCD 10.0, for example;
When starting the PC, in order to enter the BIOS, press the “DELETE” button. There we will need to change the installation priority and assign the computer to boot from the CD-ROM. After this we visit our boot disk in the drive and restart the PC;
Having entered the recovery disk, which should appear after the package of resuscitation programs has been downloaded, we must select the edited copy of Windows and go to the “System Restore” mode - the section that will be located at the very bottom of the page;
We look for the command line and enter “regedit” there (we look for it in the dialog settings of the same window). We find and then select the HKEY_LOCAL_MACHINE section, in which we need to select File, and then Load hive;
Open the “SAM” file and select the section - HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4. Double-click on the F key located there and go to the very first value located in the line, which we will need to replace with the number 10;
In the same section, select “File”, and then “Load Hive”. Click “Yes” to confirm unloading the bush. We close the registry editor, thus completing the installation process, take out the flash drive or disk and reboot the computer.

How to find out your computer password?

The question: how to crack a password on a computer still remains relevant. Unfortunately, it seems possible to actually find out the password from a computer only by choosing it correctly manually. Therefore, if you are not ready to spend several hours of your free time on this process, we strongly recommend that you simply reset it and come up with some new one.

Again, it’s much easier to just reset the password and come up with a new one afterwards. However, if you specifically need to find out the password, we recommend that for these purposes you use a program called, from the image of which you will need to make a boot disk. Having correctly configured the BIOS boot from the drive and installed this program, immediately upon entering the Desktop, a window will open in which you can see user names, including the Administrator, as well as passwords for their accounts.

When wondering what to do if you forgot the password from your own PC, it is not at all necessary to use the methods listed above to recover it. You can also reset your password in the Windows 7 operating system using the Net User command. To do this, while rebooting the PC you will need to press F8. Thus, you can open a Menu that allows you to make additional options for loading this operating system, in which you will need to select not just “Safe Mode,” but one that also supports the command line. While in it, you will need to select the built-in Administrator account and in the Command Interpreter window, immediately after this, system prompts will appear where you will need to enter net user “username” “password”.

We assume that you yourself understand that instead of “username” you will need to enter the name of your local user account, and instead of “password” you will need to enter a new password. If you did everything correctly, then in order to close the window, you will need to enter exit on the command line and restart the PC.

How to reset your password on Windows 8?

In the case of this operating system, things are much simpler! You can reset your password on Windows 8 as follows:

On the login screen, you will need to click on the special power icon, which is located in the lower right corner of your screen;
Next, you will need to press the Shift key and click “Restart”;
Click "Troubleshoot";
Click Reset PC;
Click “Next” and the system will automatically reboot in order to begin preparations for resetting the password.

How to reset your password on Windows 10?

It is not so difficult to reset the password for Windows 10 users, of course, provided that they have access to the email or phone to which their account was linked. Otherwise, you will have to reset the password from the flash drive, as already described above.

How to reset Windows 7 administrator password?

The best way to reset the Windows 7 administrator password is through the Windows Command Interpreter. Follow the following sequence of actions:

First, launch it. You can do this by following the following path: Start - Run - Run the program - cmd. In the Command Interpreter menu that opens, you will need to enter: control userpasswords, after which a window called “User Accounts” will open;
Select the account for which you want to reset the password and do not forget to uncheck the box next to “Require username and password”;
In the window that opens, you will be required to enter and then confirm a new password. Next, in the command boot window you will need to enter Exit and restart the PC as usual.

View the passwords that Windows stores

In addition to the access passwords of various users, Windows also stores a number of others, no less important: the password for connecting to the Internet, passwords for mailboxes or access to websites. As a rule, there are quite a lot of them, so it is quite natural that they are forgotten over time.

The operating system offers an “autofill” function for passwords and other frequently entered information in browsers (Google Chrome, Yandex Browser, Opera (Blink), Firefox, Explorer 11, etc.). So it is not uncommon for a user to enter a password once, and after a few months, naturally, cannot remember it. Everyone understands that important passwords need to be written down, but not everyone does this. And if you no longer remember the password, how can you find it out, since it is displayed as a series of asterisks: ******?

The solution is offered by programs from different manufacturers that can obtain the password from this string of asterisks. There are quite a lot of freely available programs for decrypting Windows passwords or hidden passwords from input lines in various browsers.

We will use a program from Passware. This is an easy-to-use, freely distributed program that analyzes passwords hidden by asterisks and reports them to you. She is very easy to work with. Just highlight the password line and click the ‘recover’ button.

Of course, there are also commercial versions of programs, which, as a rule, have a greater range of functions. For example, Password Recovery Toolbox scans the system and identifies saved passwords, data saved for automatic filling, Outlook Express passwords, Internet connection passwords, etc. This information is then presented in a convenient form. A few more alternatives to the programs described above: , or Password Viewer.

Windows XP user passwords

Windows XP stores user passwords in a modified form. For example, the password "password" would be stored as a string like this: 'HT5E-23AE-8F98-NAQ9-83D4-9R89-MU4K'. This information is stored in a file called SAM in the C:\windows\system32\config folder.

This portion of the SAM file is encrypted by the syskey system utility to improve password security. The data necessary to decrypt the information after syskey is stored in the system file in the same folder. But this folder is not available to any user. Only the operating system itself has access to it during its operation. You can access the SAM and system files only when running a different operating system or by connecting the drive to another Windows computer.

All versions of Windows XP have an "administrator" account. This name gives the user full access to the system and the ability to reset the passwords of all other users. This can save you if for some reason you cannot log in with your regular user password. The specifics of using the administrator password depend on the version of Windows XP: XP Professional.

The administrator password is set during installation of the operating system. If you wrote it down or just pressed enter and left it blank, you can easily log in as an administrator and reset user passwords. To log in to the system in administrator mode, on the system welcome screen, press CTRL+ALT+DEL twice, a window for entering the administrator password will appear.

When the computer boots, go to ‘start\control panel\user accounts’ and change the required password. Since you are already here, this is a good opportunity to correct your mistake if you left the administrator password blank. In addition, it is advisable to change the name of the ‘administrator’ account. This name is known to everyone and is the first name used to gain access to your computer. To change the account name, right-click on 'my computer' and select 'manage'. Expand 'local users and groups' and open the 'users' folder. Right-click on the 'administrator' entry and edit it.
XP Home.

This system will not allow you to simply access your computer in administrator mode. First, you will need to boot your computer into crash protection mode. To do this: restart your computer; immediately after testing the BIOS, press F8 several times; in the menu that appears, select ‘start Windows XP in safe mode’ (boot Windows XP in crash protection mode). When the computer boots, log in with the username ‘administrator’. There is no default password. You can now change user passwords by going to 'start\control panel\user accounts'. When you're done, restart your computer as usual.
Creating a password reset disk

Windows XP allows you to write information to a regular floppy disk, which provides the ability to reset your password. Naturally, if you have already forgotten the password and cannot access the system, then you will not be able to create any disk, but it is worth creating such a floppy disk in advance to protect yourself from such accidents.

To create a floppy disk: go to ‘start\control panel\user accounts’ (start\control panel\user accounts); select the name under which you are logged in; In the related tasks menu, select ‘prevent a forgotten password’; follow the instructions of the wizard that starts.

To reset passwords using a floppy disk: if you enter the login password incorrectly, the system will ask whether you have forgotten it; At this point, you will be able to use your floppy disk by following the operating system's step-by-step instructions.

Be careful: If you used the built-in capabilities of Windows to encrypt files and folders, but did not install the operating system update (service pack 1), removing the password will result in the loss of encrypted information.

Utilities for changing passwords Windows XP/7/8/10

There are special utilities that allow you to edit or reset Windows XP/7/8/10 user passwords. The principle of most of them is to load a minimal version of an alternative operating system, such as DOS or Linux, under which you can access files with passwords.

An example of such a utility can be found at this address: http://home.eunet.no/~pnordahl/ntpasswd/ Instructions for operation, as well as files for creating a bootable Linux disk, are available on the same site.

Please note that if you have used the operating system's functions to encrypt files and folders, by changing the password using any program, you will lose access to the encrypted data. In this case, the following method can help, allowing you not to replace the forgotten password with a new one, but to find out the old one.

Selection and decryption of passwords

If nothing else helps, but you have physical access to the computer, then all is not lost. You can rewrite the config and SAM files and try to decrypt the passwords stored in them using special third-party utilities. As we already said, for this you will have to use an alternative operating system, such as DOS or Linux. And when the files are at your disposal, you can use one of the programs for decrypting passwords, for example, LC4 or.

You will need:

Access to another computer.
At least two empty floppy disks.
An archiver designed to work with the command line, for example, RAR.
A DOS or Windows 98 boot disk (an image of the required disk can be obtained at http://www.bootdisk.com/) or a minimal version of Linux (for example, Knoppix). There is no need for boot disks if you can simply connect your hard drive to another computer. If you are using a DOS boot disk and the partitions on your hard drive use the NTFS file system, then to access them you will need a program that allows you to view NTFS partitions under DOS, such as NTFSDOS.
Program for obtaining passwords. We recommend using , as the beta version of this program is free, and the free version of LC4 is very limited.

Using a bootable USB flash drive:

If your hard drive has NTFS partitions, copy the NTFSDOS file to your bootable USB flash drive.
Copy the archiver (RAR) to the bootable USB flash drive.
Boot your computer from this flash drive. If there are partitions with NTFS, type the NTFSDOS command, this program will show which letter is assigned to your system drive, and you will need to use it instead of the letter C in the next step.
Place system files with passwords in the archive. For example, if you are using the rar32 archiver, the corresponding command will look like this: Rar32 a -v a:\systemandsam c:\windows\system32\config\system c:\windows\system32\config\sam If the files do not fit on one flash drive, the archiver will ask you to insert a second one.

Hacking passwords

Each program you select will display a list of accounts detected in the SAM file. Select those for which you need to define passwords. If you are using , select Attack type: Brute-force. If you used only numbers in your password, check the ‘all digits (0-9)’ box. Start the password recovery process using the command from the Recovery menu.

Password guessing can last from 10 minutes to several hours, or even several days, and may fail. Especially if the password uses letters in different cases, numbers and special characters.

This is a good way to check the strength of your passwords. If you just want to check your password, follow the steps above and see how long it takes to guess it.

Windows password cracking programs

There are a huge number of software tools that can help you crack your Windows password. Apart from the above-mentioned program, there is also Windows Admin Password Hack. But, unfortunately, it can no longer be called current, since it only works in Windows 2000/XP. Its closest replacement is MultiBoot 2k10, which is essentially a feature-rich boot disk.

conclusions

In any case, if one of your loved ones forgot the password for Windows 7, or you yourself were forced to face this, do not despair, there are plenty of solutions to this problem. Well, so that you no longer have questions about how to crack a password on a laptop, we strongly recommend that you save them somewhere, in notes inside your own smartphone, for example.

We hope you don't have to resort to the methods we've described. To avoid this need, remember to write down all important passwords. And if there is a real need to protect information on your computer, then use passwords made of characters in both registers and numbers and do not use ordinary words. In this case, your passwords will be very difficult to crack.

3 more useful articles:

A program that checks the strength of system user passwords. This utility is used by network administrators to calculate users with...

A simple utility that allows you to display passwords hidden by asterisks. Compatible with all browsers, including...

Windows Repair is a rare type of program that can rid your personal computer of almost all…

Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from an administrator account, and you don’t have the installation media with you. In this case, you will have to reset the password using slightly non-standard methods.

Removing the password from Windows 7 without installation media

If you are unable to download a password reset disk for Windows 7, you can use one of the methods suggested below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".

There is no need to try to reset your Windows 7 password using third-party software, as this will lead to certain problems.

Method 1: Command Line

This is the most universal, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even from a guest account. Usually this is always there by default.

The Guest account has some limitations compared to the Administrator account. By default, they apply to making any changes to the OS, for example, installing/uninstalling programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.

The instructions for this method are as follows:

1. Press the key combination Win+R.
2. In the line that opens, enter cmd and click Enter.

1. Will start "Command line". First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and click Enter.

1. A list of all operating system users is displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
2. Now write the command net user administrator_login new_password. Example command: net user Admin 123456. Press Enter.

After applying the command, restart your computer and log into the administrator account with a new password.

Method 2: Recovery Menu

This method can be dangerous, as it involves disconnecting the computer from power while it is running. However, a single use should not cause much harm.

The bottom line is this:

1. Restart your computer if it was turned on or turn it on if it was turned off.
2. When Windows starts loading, turn it off abruptly. For example, press the power button or unplug the power cable.
3. Then reconnect the power and turn on the PC.
4. Instead of the standard Windows startup, the screen should start "Windows Error Recovery", that is, recovery from an error.
5. You will be offered several options for starting the operating system. Select "Launch Startup Repair". In the Russian version it may be called "Run boot repair".

1. The system will begin loading. You may see a window asking for permission to perform a system restore procedure ( "System Restore"). Cancel by clicking on "Cancel".

1. A recovery error message appears. Click on the item "View problem details".

1. A text file describing the problem will open. Here you need to click on the item "File" in the top menu. From the drop-down list, click on the item "Open".

Will open "Conductor" Windows with access to all system files. You need to go to the following path: C:\Windows\System32.
Here, find and rename one of these files utilman.exe or sethc.exe, adding the postscript bak or old to the name of one of them. If these files are not displayed in Explorer, then in the column "File Type" set the value "All files".
Now find the cmd.exe file. Copy it and paste it in the same directory.
Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if in step 10 you added a postscript to the file "sethc" and vice versa.
You can close "Notebook" and press "Finish". After this, the system will reboot.
Wait for the Windows start screen to load and click on the icon "Special abilities", if you renamed the file to "utilman". If you renamed it to "sethc", then you will need to press the key five times Shift.

This way you will have access to "Command line" without having any access to the system. In the interface "Consoles" you will have to do the following:

1. If you do not know the exact name of the administrator account, then enter the command net user. It will display all data regarding system users, including their status.

1. Now write this command: net user Administrator account name new password. Example command, net user Admin 123456. Press Enter.

Restart your computer and try logging in with the new password you set.

The methods discussed above help you reset your password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and perform a reset through it.

Every user has files that he would like to hide. In this case, you need to set a password on them so that no one opens them. If you need to take advantage of this feature, learn how to password-protect a folder on your Windows 7, 8, or 10 computer.

RMB on the folder you are hiding → Properties → “Attributes” block → check the “Hidden” box → confirm the action.

The second option is to restrict access. But this method is effective if a separate account without Administrator rights is created on the computer for each user.

RMB on the desired folder → Properties → security tab → “Groups and users” block → Edit → Add.
In the “Select” window, enter the names of users for whom access will be limited → Check to check for spelling errors - confirm the actions.
In the “Group Permissions” window, check the boxes for the actions you prohibit.

After completing the action, users, when they log in under their own account, will have limited access rights to this directory.

WinRar and 7-Zip archivers

The fastest way to password protect is with WinRar or 7-Zip archiver.

Now, when unpacking the archive, a dialog box will appear in which you need to enter a password to perform further actions. Watch the video for the detailed process.

Programs with a high level of protection

Password Protect

Password Protect is a shareware program that works in all modern versions of the OS. The utility password-protects and hides folders, making them inaccessible to users who do not know the password.

Good to know! After using the information, you need to re-password it.

Folder Lock

The Folder Lock program is shareware and requires installation on your computer. Its main drawback is the English-language interface.

Conclusion

You can set a password for a folder or file in Windows 7, 8 and 10 using standard means, using archivers or programs with a high level of protection. The latter are provided on a shareware basis, but provide the maximum level of confidentiality.

Removing the password when logging into Windows 7 is quite simple. This will require a minimum amount of time and knowledge. This kind of operation usually takes no more than a couple of minutes.

This can be done in various ways: through a special console, command line, or by resetting key data from SAM. Each method has both its advantages and disadvantages.

Why set a password

It often happens that some important and confidential data is stored on the PC, access to which should be limited. Microsoft Windows makes it possible to easily limit the circle of people who have access to files on your computer by installing a special key. Each person can have his own if there are several users.

An access code is also required to protect information on the PC to different owners from each other. For example, this is often necessary for parents so that curious children are not able to get acquainted with some information that they are not entitled to.

Removing the password through the “Run” console

One of the easiest ways to disable entering an access key on the OS is by using the “Run” item. Accessing it is quite simple - just click on the “Start” button. Most often, the item in question is present on the right side of the window that opens.

Entering a command

To disable the function in question, you must enter a specific command. It will open a special applet that allows you to do this.

The process of entering the command is as follows:

open the Start button menu;
click on the “Run” item;
In the field that opens, write “control userpassword2”.

After completing these operations, a window called “User Accounts” will open.

It contains two tabs:

"Users";
"Additionally".

You need to focus your attention on the first tab. Since this is where all account settings are made, including changing the login, access key and other attributes. In addition, if desired, you can easily add new accounts or delete old ones.

Disabling the password

To disable Password, just open the corresponding window (“accounts” -> “users”). In it, you need to uncheck the box called “Require username and...”. In this simple way you can disable the need to enter Password.

Confirming the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

in the window called “Accounts”, double-click on the desired line (admin, user or something else);
click “OK”.

A window will open containing three fields. Only the top one should be filled in; login is written there. The rest remain empty. After that, click on “OK” again. After performing these operations, when starting Microsoft Windows, there will be no need for Password. Which is quite convenient if only one person has physical access to the PC.

video: Password reset

Removing the password when starting Windows without programs

Also, Password in the operating system in question can be unstuck without using the “Run” item, as well as various third-party applications. To do this, just use a special command line. In this way, you can avoid having to enter Password when you turn on the computer, as well as when it comes out of sleep mode.

Command line setup

In order to configure the command line, you need to use the Windows distribution disk. This method of setting up and resetting the access code is suitable if it is forgotten and it is not possible to start the OS otherwise.

First of all, you need to install it through the BIOS to boot from a CD or other device containing the distribution. After this, you should reboot and start the installation.

After this, the following actions are performed:

CmdLine – enter cmd.exe;
SetupType – replace parameter 0 with 2;

select section 999 and click “Unload hive”;
extract the distribution package and reboot the PC.

Resetting your password and login

After loading the operating system, the user will immediately see the command line window. To reset the password, you must enter the following command: net user username

Photo: Net user username_new_password

If for some reason User has forgotten the account name, then you can simply write net user without parameters. This will allow you to display all available items and select the one you need.

If the new Password is not intended to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: disk name:\Windows\system32\net user user_name new-key.

It is also often necessary to create a new account without an access key.

To do this, you need to run the following commands in strict order:

These commands perform the following operations in strict order:

creating a new User;
adding it to the Administrator workgroup;
removal from the Users group.

The reset method in question is quite complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There are a huge number of different ways to reset your login code. But all of them only change in various ways the information stored in a special file called SAM. It is used by the OS to store data related to both User and Password. This abbreviation name stands for Security Account Manager.

The file in question does not have an extension, since it simply does not require one. It is a direct part of the registry, located in the directory systemroot\system32\config. Also, a copy of the file in question is available on the emergency recovery disk, if for some reason this function was not disabled earlier.

Editing this file to change the operating system login parameters is the most difficult way. To work with SAM, you need specialized software from third-party developers. All operations with SAM must be performed with the utmost care and precision.

How it works

The most popular application for changing data in the SAM file is active password changer. Before you start, you need to copy the application to some media or other FAT32 hard drive.

After performing this operation you must:

run the password file from the folder "BootableDiskCreator";
in the window that opens, select "Add USB...";
activate the button "Start".

After completing all the above steps, a bootable USB flash drive will be created.

The process of changing data using the application in question is as follows:

This method of working with accounts and their attributes is as secure as possible. Since it allows you to avoid editing the registry and other manual operations. This can sometimes be difficult for not very experienced users who started working with their PC relatively recently. The likelihood of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for PC use by individual accounts.

The disadvantages include the fact that some older motherboard models do not support launching from a USB drive. In such a situation, you have to look for some alternative options: a floppy disk, a CD, or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. There are many ways out of such a difficult situation; reinstalling the system is not always required. Moreover, any computer owner who has minimal skills in interacting with this type of equipment can cope with resetting the OS access code.

Setting a password on your computer is intended to ensure more reliable security of information on it. But sometimes, after installing code protection, the need for it disappears. For example, this may happen because the user managed to ensure that the PC is physically inaccessible to unauthorized persons. Of course, then the user may decide that it is not very convenient to always enter a key expression when starting the computer, especially since the need for such protection has virtually disappeared. Or there are situations when the administrator deliberately decides to provide access to the PC to a wide range of users. In these cases, the question becomes clear: how to remove the password. Let's consider the algorithm of actions to solve the problem posed on Windows 7.

Resetting the password, as well as setting it, is done in two ways, depending on whose account you are going to open for free access: the current profile or the profile of another user. In addition, there is an additional method that does not completely remove the code expression, but does not require you to enter it at login. Let's study each of these options in detail.

Method 1: Removing the password from the current profile

First, let's consider the option of removing the password from the current account, that is, the profile under whose name you are currently logged into the system. The user does not need to have administrator privileges to perform this task.

Method 2: Removing the password from another profile

Now let's move on to the issue of removing the password from another user, that is, from a different profile under which you are currently performing manipulations in the system. To perform this operation, you must have administrative rights.

Go to the section "Control Panels" which is called "User Accounts and Security". How to perform this task was discussed in the first method. Click on the name "User accounts".

In the window that opens, click on the item "Manage another account".

A window opens with a list of all profiles that are registered on this PC, with their logos. Click on the name of the one from which you want to remove the code protection.

In the list of actions that opens in a new window, click on the item "Deleting a password".

A password removal window opens. There is no need to enter the key expression itself here, as we did in the first method. This is because any action on another account can only be performed by an administrator. At the same time, it does not matter at all whether he knows the key that another user has set for his profile or not, since he has the rights to carry out any actions on the computer. Therefore, to eliminate the need to enter a key expression when starting the system for the selected user, the administrator just needs to click the button "Remove password".

After performing this manipulation, the code word will be reset, as evidenced by the absence of a status indicating its presence under the icon of the corresponding user.

Method 3: Disabling the need to enter a passphrase at login

In addition to the two methods discussed above, there is an option to disable the need to enter a code word when logging in without completely deleting it. To implement this option, you must have administrator rights.

In Windows 7, there are two methods for removing a password: for your own account and for another user's account. In the first case, it is not necessary to have administrative powers, but in the second, it is necessary. At the same time, the algorithm of actions for these two methods is very similar. In addition, there is an additional method that does not completely remove the key, but allows you to automatically log in without having to enter it. To use the latter method, you also need to have administrative rights on the PC.