What to do if the iPhone cannot be flashed and displays an error. iPhone errors, malfunctions and solutions Error 39 when updating iPhone 5
While iTunes is updating, it may inform you that error number 2003 has occurred, which means the software has crashed and iTunes cannot be updated further. The error number itself usually determines the cause of the failure, and the classification of errors made by specialists does not always help determine the true cause of its occurrence and, accordingly, a method for solving the problem associated with its removal.
In this article we will try to reveal the true causes of error 2003, find ways to overcome and restore the system without an error when all means have been used. What happens to the device when error 2003 occurs?
iPhone users often encounter the “Error 2003” message that appears on the screen, which closes the active window and stops working without saving. Sometimes “error 2003” manifests itself as follows: you turn on a new program or run a program update, and suddenly the window goes dark, an error 2003 message appears on the screen, or the entry “Itunes Error 2003” appears on the screen.
Quite often, a sign of error 2003 is the slow operation of the device buttons and their poor response to commands in Windows. A common occurrence is that the device periodically freezes before starting to execute a command.
If you downloaded iTunes and saw an error message during the installation process, then most likely the program will fail and it is better to delete it and then install it again. This message may also appear when shutting down a Windows program. or when installing its software.
In any case, the important point is to determine the causes of its occurrence and, by tracking them, you can subsequently eliminate the error in the correct way.
A common cause of the error is the incorrect download of the iTunes program, in which the program files are damaged.
Also, the registry of the iTunes program may fail if it is damaged as a result of reinstalling, updating, or deleting the program itself.
It happens that users, downloading the iTunes program from unidentified sources, pick up a virus that destroys the program over time and causes harm to the device.
There are also cases when, when installing other competitive programs, iTunes files are deleted as unnecessary.
In fact, there may be many more reasons for error 2003 than are identified in this article, since all the reasons have not yet been established and are being monitored by the program itself and its specialists working to improve it.
Methods to Fix iTunes Error 2003
What to do when error 2003 occurs when updating iPhone 4 and 5S or iPhone 6? Most likely the error occurred when syncing the iPhone with iTunes. There are different methods for eliminating the consequences of an error and bringing the device back to normal operating condition. Here we will try to touch on all possible cases and describe in detail how to eliminate them. First, we should describe simple ways to deal with error 2003, and then we will move on to more complex ones if the previous methods do not become effective for the user.
Cable replacement
Very often, problem 2003 occurs due to a problem with the data cable. In this case, an effective solution would be to replace the data cable with another one, or often an effective way is to replace the USB port.
Low battery charge on iPhone when flashing
Error 2003 can occur if the USB port is low on power and therefore the firmware cannot enter DFU mode. A number of actions can correct the situation: rebooting the device and charging the iPhone and then connecting it to a different socket.
Reinstalling iTunes
Another effective method to resolve error 2003 is to uninstall and install the iTunes software. To carry out this reinstallation process, you need to go to the “Programs and Features” section while simultaneously pressing the “Start” key. In the “Control Panel” section that opens, in the right corner, select the “Programs” option and then the “Programs and Features” subsection. In the proposed program menu, find iTunes and activate it. In the proposed action, select “Delete” or “Delete/Change” and, following the instructions of the program wizard, complete the removal process.
Once the iTunes program along with the virus it contains is destroyed, proceed to the process of installing the latest version of iTunes from the official Apple source.
Resolving the error by removing viruses
In order to clean your iTunes program from viruses living in it, you need to scan your device and identify the malicious program. Therefore, when viruses are detected, the iPhone will inform you of error 2003. As a rule, a virus that has settled in behaves aggressively, damaging files or deleting them from the system. Sometimes the virus contains error 2003.
Therefore, it is always recommended to install a protective tool, for example, the Emsisoft Anti-Malware program, which will guard your device and, if necessary, quickly neutralize and remove viruses that have entered the system, without waiting for your command.
Fixing error 2003 when restoring the Windows registry
In this case, the work of fixing the Windows registry should be entrusted to a professional in this field, since manual work requires excellent knowledge, experience and care. With a slight inaccuracy, putting just one wrong sign in the registry, all the work can lead to the existing program breaking and the device freezing, after which you will have to reinstall the operating system with the loss of all data on the iPhone.
Automatic registry fix
To avoid making mistakes, use the right tools when performing work to fix the registry, in particular, the Microsoft product that specializes in this - WinThruster. It will scan the device, find and eliminate the consequences of the iTunes 2003 error. After the running program clears the registry of damaged files, eliminates gaps and fills them with healthy files, you can set automatic scanning to optimize the process.
In this case, the cleaning program will save a backup copy of the data every time in case of canceling the action being performed, in order to protect the smartphone from damage to the OS. If you correctly run the registry cleaning and repair program, then subsequently it will not only restore iTunes, but also increase system performance and speed.
How to Manually Fix Registry Errors
As already mentioned, manually fixing the Windows registry can only be used if you are a professional or have successfully completed this job at least once. If you are sure that your actions will not cause Windows to malfunction, then Next, you will learn how to manually perform steps to repair and restore a damaged registry.
First, make a backup copy of the iTunes registry that gives error 2003, and then proceed with the recovery process on your computer, which consists of the following steps.
Go to Start and use the search engine to enter the phrase “command”. Then, holding down the CTRL-Shift and ENTER buttons together, call up a dialog box in which select the answer “Yes” from the options offered. after which a blinking cursor will appear on a black background, where you need to enter the command "regedit" and continue by clicking the ENTER button. In the registry that opens, find the iTunes program to create a backup copy, then in the “File” section, execute the “Export” command, and save the exported backup copy in a special folder, coming up with a folder name for the iTunes backup. After a copy of the program has been created and saved, find the “Export Range” section and select the “selected branch” position by clicking on the “Save” button. This copy file will be saved with the extension “.reg”. Remember the folder name and path to it. After which you can manually correct the error in the registry by a professional specialist.
Troubleshooting with cleanmgr
This program also effectively fights by destroying outdated files, residual and unnecessary data. If you do not regularly clean the device's memory, the accumulation of such files can not only cause slow operation of the iTunes program, but also cause error 2003. Therefore, getting rid of the error will involve deleting the accumulations using the utility. After cleaning, the device will increase the speed of perception and, accordingly, error 2003 will eliminate itself.
Please note that although the cleaning utility itself is effective, however, in other Microsoft programs, it is not able to clean residual files. For example, it can't handle Office or Chrome, as well as others, including Apple Inc.
Not all programs are effective at cleaning up obsolete files. One of the proven ones is the specialized WinSweeper program developed by Microsoft, which has the ability to clean the most demanding device. If you use this cleaning program every day using the auto-scan function, your device will be consistently protected from contamination, allowing you to operate your iPhone at maximum speed, preventing the browser from becoming overcrowded and, accordingly, the occurrence of error 2003.
The process of cleaning a device using cleanmgr
Using the “Start” key, enter the “command” task in the command line, then simultaneously holding down two keys ENTER and CTRL-Shift , open the dialog menu in which we select the affirmative answer “Yes”. After the blinking cursor opens on a black background, write the command “cleanmgr” and activate the process by pressing ENTER. Next, the program will calculate the volume of files to be deleted , then use the checkboxes to mark the necessary files to be deleted, for example, the category - temporary files, and press the ENTER button.
Update your drivers
Alternatively, you can try updating the drivers, since over time they become outdated or damaged and, accordingly, display error 2003. If you use the update utility, the problem with regularly updating drivers will be solved. To do this, experts recommend installing the effective DriverDoc utility developed by Microsoft.
The problem of drivers is relevant from the point of view that the latest installed versions of drivers solve the assigned tasks as quickly as possible and are less energy-consuming, while old, low-performance ones slow down the process, which is why error 2003 occurs.
Restore your Windows system
Restoration itself indicates that the program will return to its previous state. That’s right, by restoring the system, the program returns to its previous course, when the error did not occur. This process will not harm other documents contained in the device’s memory; all photos or videos will remain in place. In this case, the result of the recovery process will be the absence of error 2003.
In order to start the system recovery process, you need to use the “Start” key in the search menu bar to write down the “System Restore” command, and then press the ENTER key. In the partition window that appears, click the “system restore” command and write down the password. The program will instruct you in further actions, and you select your device as a recovery point. After the recovery process, all outdated commands will be reset, and the program will return to its original state.
Windows Software Update
The occurrence of error 2003 may be due to an outdated Windows program that slows down the operation of the device. Therefore, updating it through official sources will be an effective way. To do this, find the “Start” button in the start menu and write down the “update” command, then run it by pressing the ENTER key. In the dialog menu that appears, start the “Windows Update” process. After checking and making sure there are available updates, start the process "Install updates."
Reinstalling Windows
The most recent method to fix error 2003 would be to uninstall and reinstall the Windows program. This process is carried out in the latter case, when none of the above actions help. It is possible that a virus that took hold at one time not only damaged working iTunes files, but also damaged the Windows operating system itself. In this case, reinstalling it will save the situation and save you from the error. With this process, it will not be possible to save stored files and documents, music and videos, photographs and pictures or programs. Therefore, make a backup copy of your device data in advance so that you can return it to its original location after installing Windows.
Thus, error 2003 has various causes and, accordingly, elimination methods depend on the correct diagnosis of the device: perhaps an easy cable replacement will solve the problem, or perhaps you will have to reinstall the Windows operating system to eliminate it. Everything will depend on the degree of virus infection of the system.
Never try to perform complex functions such as reinstalling the OS or flashing an iPhone, eliminating and restoring registry errors without having special knowledge and sufficient practice. Since minor errors in your actions can damage the device, fixing it can be more difficult than purchasing a new one.
;
Due to incorrect installation of applications, the functionality and settings of the iPhone 5S can be seriously impaired. Often, if the phone is frozen, the only solution to restore the functionality of the Apple device is to carry out the standard recovery procedure. We will describe how to completely return your Apple device to its previous functionality.
Ways to restore device functionality
Various types of problems can occasionally arise on the iPhone - glitches appear, the phone does not respond to button presses, or the wait is too long. Recovery methods in these cases may vary, however, if the problem is serious, failures often occur when using “softer” methods of resetting parameters 47, 14, 4014,4013, 4005, 3194, etc.
Normal reboot (Soft Reset)
When a gadget is frozen, sometimes you can get it out of this state by rebooting:
- Press and hold the Power and Home buttons at the same time for about 10 seconds;
- When the Apple logo appears, release the keys.
It is possible that the glitches in the iPhone 5S will disappear after this.
Reset via settings menu
iPhone 5S recovery is also activated through standard gadget tools:
Here, out of the six proposed points, only two may interest us:
- “reset settings”, which returns the phone to its original state while preserving all user data;
- “reset settings and content” - all existing data is destroyed, only factory settings are returned.
The wait for such a reset should last less than a minute, but if the device is frozen and the described recovery methods do not suit you, you will have to proceed through iTunes.
We use standard Recovery Mode
Make sure you are ready to reset in Recovery mode:
- iTunes updated,
- USB cable connected to the computer.
If all the preparations have been completed, you can restore your iPhone 5S.
Reset Sequence
The sequence of actions when rebooting an iPhone 5S in Recovery mode is as follows:
The process will go automatically. In a maximum of 3 minutes you will receive corrected settings and saved user information.
Update in DFU mode bypassing iOS phone
Unlike the one discussed above, updating in this mode will destroy the user’s information on the iPhone 5S, so it is advisable to make a backup before performing it. But such a reinstallation of the OS often helps to avoid failures with codes 50, 47, 14, 3014, 3194, 4005, 4013, 4014, etc. Don’t forget to download the current version of iOS for your phone through the Apple support site. For this:
- go to http://www.getios.com/ and select the name of your device in the appropriate field;
- In the The Model drop-down list, specify the device model;
- select the iOS version (for iPhone 5S it cannot be lower than the seventh);
- Click Download and get ready to download a file weighing several gigabytes.
The update itself is performed as follows:
- Connect your device to your computer via a USB cable.
- Switch the gadget to DFU mode by performing the following settings:
○ hold down the Power and Home buttons;
○ after the screen goes dark, release the Power key while continuing to hold Home (the wait will take 10 seconds);
○ if you entered DFU correctly, the computer will notify you through iTunes that the device is in the appropriate mode, while the device itself will remain turned off and nothing should be displayed on the display. 
If there is no backup copy, all you have to do is simply disconnect the device from the computer. It is worth noting that updating the device in DFU mode by formatting the memory and installing the OS in its cleared area proceeds more correctly, while failures 47, 3194, 4005, etc. occur quite rarely. Therefore, in case of serious problems, if the gadget is frozen and the usual methods do not help, you need to restore it through DFU.
Errors that prevent you from updating the firmware and how to fix them
Sometimes, for various reasons, it is not possible to complete the phone firmware process due to errors, each of which has its own code - 50, 47, 14, 3194, 4005, 4013, 4014, etc. Let's look at the error codes, as a result of which they arise and how to eliminate them.
50
Error 50 occurs due to the lack of response to the application from the server. At number 50, it occurs not only during the firmware installation, but also when downloading any content from the iTunes Store. Usually the cause is antivirus software settings.
To resolve the issue when code 50 appears, do the following:
- Log out and log back into your iTunes account;
- Disable all antivirus applications;
- Try downloading iOS for your device again;
- To solve the problem with error 50, you can also try uninstalling iTunes and reinstalling it.
Performing these steps does not always cause code 50 to stop preventing you from updating your phone. Sometimes the 50th error is a consequence of viruses that delete iTunes-related files. Therefore, if there is no result, scan your PC for viruses and get rid of them if found.
Sometimes error 50 disappears after cleaning the system of debris (temporary folders and files) with the appropriate software, when updating drivers. You can check the OS system files with the command sfc /scannow (in the Run window field, run as administrator) - this way important Windows data can be returned, including those associated with the appearance of code 50.
3014
Error 3014 occurs when there is not enough free space on the HDD when performing an update. Firmware takes up a lot of space during an update, so error 3014 is often resolved by freeing up disk space. To do this, simply remove unnecessary music and movies, garbage, etc.
47
It's possible that when Error 47 appears, you're dealing with a storage chip hardware problem. This is further indicated by the lack of information about the modem firmware version and IMEI in the “About the device” section. Code 47 also appears when moisture gets into the modem. The case is serious - No. 47 can only be gotten rid of at the service center by replacing the microcircuit.
Sometimes Windows itself throws Error 47 even though it appears to be an iTunes error. This is due to the fact that the OS cannot use the device, since it is prepared for safe shutdown, but has not yet been disconnected from the computer. Then, to eliminate failure 47, it is enough to remove the device from the socket and reconnect it.
14
Error 14 may not allow you to reset the settings and update the phone for several reasons. Firstly, code 14 will cause a failure due to a violation of the firmware files. Often error 14 occurs when trying to install non-original iOS on an iPhone. The solution to problem 14 during installation is to download the archive again from the support site.
Error 14 often occurs due to problems with the equipment, in particular with the USB port or the cable itself. To eliminate No. 14, it will be enough to replace the cable or connect the gadget for updating iOS to a different port. Sometimes the problem also occurs due to a false positive from the antivirus - change the settings or disable applications - error 14 may disappear.
3194
In the simplest case, code 3194 indicates that the version of iTunes with which you are trying to flash your iPhone 5S is outdated. To eliminate Error 3194 in this case, it is enough to reinstall this software on your computer.
Also, the appearance of code 3194 during the update indicates that the Apple server does not have SHSH hashes for this firmware together with your gadget. Therefore, you cannot upgrade to this version of iOS.- error 3194 is eliminated after downloading the current OS version for the gadget.
You can also try removing 74.208.105.171 gs.apple.com data from the hosts file. The file is located:
- C:\Windows\System32\drivers\etc\hosts (Windows);
- /etc/hosts – (Mac OS).
To remove code 3194, try disabling your security software. In the iPhone 5S, fault 3194 also occurs when trying to roll back to an older version of the OS - in modern iOS such Downgrade is impossible.
4005
The device issues code 4005 when a critical failure occurs while updating the device. It can occur in Recovery mode. Therefore, to prevent Error 4005 from interfering with the recovery process for any system reasons, carry it out in DFU mode. Try using a different USB cable as well. Also, sometimes disabling the antivirus helps resolve the 4005 failure during update.
Problem 4005 may also be a consequence of not the latest software versions. Try downloading the latest firmware, reinstall iTunes, and then reflash the phone in DFU mode. As a last resort, try to avoid failure 4005 by transferring your work to another computer with iTunes. If this does not help, error 4005 is probably the result of hardware problems that can only be fixed by a service provider.
2005, 2009
Codes 2005 and 2009 usually indicate problems with the data cable. To be able to reflash the device and avoid crashes in 2005 and 2009, disconnect the USB devices on the PC, leaving only the keyboard and mouse and the gadget itself. Perform the restore again.
If you cannot solve the problems with the appearance of Error 2005 and 2009, try disabling antivirus applications and scan your PC system files for damage.
4014, 4013
The appearance of codes 4013 and 4014 during the recovery process indicates that critical errors have occurred and that the firmware file cannot be uploaded to the device. The first problem with Error 4013 can be solved by flashing it in DFU mode.
Failure 4014 may be able to be fixed if you try to reflash the device from another PC. In both cases, it is advisable to use a different USB cable.
Report content
Copyright infringement Spam Incorrect content Broken links
iTunes Error Codes
If you try to update or restore your device or program, the update or recovery process may stop and a warning may appear in iTunes.
You can resolve many recovery errors by following these simple steps:
1) Update iTunes to the latest version
2) Make sure the operating system is not outdated
3) Disconnect other USB devices
4) Check your security settings
5) Restart your computer
- error 1 The firmware does not fit the device, or the iTunes version is too old to work with this version. Update iTunes to the latest version, if the error persists, download the firmware again
- error 2 The firmware is recognized, but cannot be used due to the fact that it was assembled and packaged incorrectly (usually the error appears when working with custom firmware) Upload the firmware or try another one
- error 4 (or -4)
This error may appear under the following conditions: Access to ports 80 or 443 is blocked; Firewall, third party security software or other Internet access settings are blocking access to albert.apple.com or phobos.apple.com servers; The iTunes Store server is overloaded.
- error 5, 6 The firmware cannot be installed either because the boot logos are damaged, or because the device is entered into the wrong service mode (for example, the firmware is intended for DFU Mode, and you are trying to recover through Recovery Mode) Enter the device into DFU Mode if does not help - download another firmware
- error 8 The firmware is compatible with the iTunes version, but does not fit the device (for example, it is for the wrong generation of device) Download the firmware version that matches your device model
- error 9 Kernel panic in the device when working with firmware. Occurs either when data transmission via the cable is interrupted, or when the firmware is incompatible with the selected recovery mode. Try restoring the firmware using DFU Mode. Check whether the cable is securely fastened in the USB port and in the 30-pin connector of the device. Change cable or port.
- error 10 The low-level LLB bootloader is damaged or missing due to a crooked custom firmware. Download another custom firmware or rebuild it yourself
- error 11 The firmware is missing a number of files needed for downloading (BBFW). Download another custom firmware or rebuild it yourself
- error 13 There is a problem with the USB cable or 30-pin connector, or an attempt to install a beta version of iOS from Windows. Change the cable or USB port. Disable USB 2.0 in BIOS
- error 14 During the flashing, a violation of the integrity of the firmware file was detected. Disable the firewall and antivirus, try changing the cable or USB port, try a different firmware
- error 17 Attempting to update from one custom firmware to another custom firmware Before updating the firmware, enter the device into Recovery Mode or DFU Mode
- error 18 (or -18) This error occurs when the media library on the device is corrupted and cannot be modified or updated. To resolve this issue, try updating iTunes to the latest version and restore again.
- error 19 (or -19) This error occurs when upgrading to a newer version of the software when iTunes tries to back up your iPhone during the synchronization process. To resolve this issue, follow these steps:
Uncheck "Sync automatically when iPhone is connected" in the Browse tab in iTunes.
Remove iPhone.
Reconnect your iPhone.
Select Update.
- error 20 Instead of DFU Mode, the device is in Recovery Mode Enter the device into DFU Mode
- error 21 DFU mode error when jailbreaking Enter the device into DFU Mode via Pwnage Tool, sn0wbreeze or redsn0w
- error 23 iTunes cannot read the IMEI or MAC address of the device's hardware. If the error repeats on other firmware, then the problem is hardware in nature.
- error 26 Error when working with NOR memory due to crooked firmware. Download another custom firmware or rebuild it yourself
- error 27, 29 iTunes gets stuck in a loop when trying to restore firmware Update
- error 28 Hardware malfunction of the 30-pin connector. Only service can help you.
- error 34 Not enough disk space Free up the hard drive on which iTunes is installed
- error 35 Permissions to the iTunes folder on Mac are corrupted. Launch Disk Utility and restore access rights.
- error 37 The low-level bootloader does not match the device model due to an error when assembling custom firmware. Download another custom firmware or rebuild it yourself
- error 39 Requires the latest version of iTunes. Update iTunes.
- error -39 Unable to download music from the iTunes Store Update iTunes to the latest version, sign out and sign back in, turn off your firewall and antivirus
- error 39, 40, 306, 10054 Problem accessing activation and signing servers Disable firewall and antivirus
- error 48 (or -48) close iTunes and delete the IPSW file. Then launch iTunes and try downloading again. To locate the IPSW file, see the “Rename, move, or delete the iOS software (IPSW) file” section below.
- error -50 iTunes cannot contact the server itunes.apple.com Update iTunes to the latest version, sign out and sign back in, turn off your firewall and antivirus
- error 54 Can't transfer iTunes Store purchases from your device Delete your old backups. Deauthorize your computer in iTunes (Store menu) and try again
- error 414 You do not have the right to upload content rated 17+ to your device. Correct the age information in your iTunes account (menu "Store-View My Account")
- error 499 This warning is caused by security software.
- error 609 This warning may appear when you try to get album art for songs in your library. To resolve this issue, follow these steps:
-Open iTunes.-Select sequentially Store > Logout(This will sign you out of your iTunes Store account).
-Close iTunes.
-Launch iTunes again.
-Select sequentially Store > Login and sign in to your iTunes Store account.
-Try re-selecting songs and selecting Add-ons > Get Album Artwork.
- error 1000 This error is often caused by security software interference, a poor Internet connection causing IPSW file corruption, or a conflict with other devices connected to the computer via USB.
- error 1004 Apple servers were unable to send SHSH hashes for the device. Try flashing later
- error 1008 Your Apple ID contains invalid (from iTunes' point of view) characters. Try not to use anything other than Latin letters and numbers in your Apple ID.
- error 1011, 1012 The iPhone/iPad modem does not respond. Try restarting the device. If the error persists, there may be a hardware problem.
- error 1013-1015 iTunes tried to downgrade the iPhone/iPad modem version. The error indicates that the firmware was completed normally, however, the iPhone/iPad itself will not be able to boot after it. You must use the Kick Device Out of Recovery function in the TinyUmbrella utility
- error 1050 Apple activation servers are unavailable Try activating your device later
- error 1394 System files are damaged as a result of an unsuccessful jailbreak Restore the firmware and jailbreak again
- error 1403 The firmware file is damaged. Download the firmware file using iTunes.
- error 1415-1428 Problems with data transfer via USB cable Check the integrity of the cable and the serviceability of the USB port
- error 1430, 1432
The device is not recognized Change the cable, USB port, computer. May indicate a hardware problem
- error 1450 Unable to Modify iTunes Library File Restore Permissions on Mac OS X, Check Owners and Folder Permissions on Windows
- error 1479 This error appears when accessing Apple resources during the update or restore process. Quit the program, unplug your device from USB, restart your iOS device, reconnect your device to your computer, then launch iTunes and try updating or restoring again.
- error 16xx (1601, 1604, 1602, 1611, etc.) This means that the program cannot check the firmware. Ways to get out of the situation are to turn off User Account Control (UAC in Vista and Seven); use the latest version of iTunes; move the firmware file to a directory with a simple and short name; download the original firmware from the Apple website and recreate the custom firmware; change the USB port or correctly transfer the device to DFU.
- error 1600, 1611
Restoring to custom firmware is done through DFU Mode, although it should have been done through Recovery Mode. Enter the device into Recovery Mode.
- error 1603, 1604 A non-jailbroken device can be restored to custom firmware. Jailbreak the current firmware. Please note: jailbreaking through the Spirit utility and the JailbreakMe website is not complete and also leads to such errors
- error 1609 The version of iTunes is too old to work with the device. Update iTunes to the latest version.
- error 1619 iTunes sees the device in normal mode, but cannot work with it in DFU mode. Update iTunes to the latest version
- error 1644 Other system processes are preventing iTunes from working with the firmware file. Restart your computer, turn off your firewall and antivirus, and close all programs running in the background.
- errors 2000-2009 (2001, 2002, 2005, 2006, 2009, etc.) If you see these errors on your Mac, disconnect all third-party devices, hubs, additional cables, displays, and try a system restore. If you are using a Windows computer, disconnect all USB devices and accessory cables, leaving only the keyboard, mouse, and device connected, then restart the computer and try the recovery again. If this does not resolve the issue, see the troubleshooting steps above for error 1604.
- error 2001 Mac OS X drivers are blocking access to the device Update Mac OS X to the latest version
- error 2002 iTunes access to the device is blocked by other system processes Close all other programs, turn off the antivirus, restart the computer
- error 2003 The USB port is damaged. Clean the USB port, check the contacts, try connecting the device to another port or computer.
- error 2005 Cable damaged Replace cable
- errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, etc.)
Error codes in the 3000 range usually indicate that iTunes cannot connect to the update server (gs.apple.com) on port 80 or 443. This may be caused by outdated or incorrectly configured security or firewall software. installing an older version of iTunes, an entry in the hosts file that redirects requests sent to the gs.apple.com server, or settings for accessing the Internet through a proxy server. If your connection is through a proxy server, try updating or restoring without a proxy server, or use a known good network connection.
- error 3014 may indicate that you need to free up space on your computer's hard drive before attempting recovery again. Most likely
- error 3000, 3004, 3999
Unable to access the firmware signing server Disable the firewall and antivirus
- error 3001, 5103, -42210
iTunes can't load the video Find and delete the "SC Info" service folder from the disk
- error 3002, 3194
It is not possible to request a suitable SHSH hash from the firmware signing server. Occurs if you redirected iTunes to the Cydia server through the hosts file or the TinyUmbrella utility, but the server does not have saved hashes for this firmware. Disable TinyUmbrella or delete the line "74.208.105.171 gs.apple.com" from the hosts file
- error 3123 iTunes can't rent videos Deauthorize your computer from iTunes and sign in again
- error 3194 indicates that you do not have the latest version of iTunes installed.
- error 3195 The received SHSH hash is corrupted. Try to start flashing again.
- error -3221 Incorrect permissions for the iTunes program file on Mac Run Disk Utility and restore permissions
- error 3200 indicates a network connection or traffic problem. If you get this error, wait an hour or a little more and try again.
- error 5002 Unable to confirm payment in the iTunes Store Please ensure your credit card information is correct.
- error 8012 The error occurs when iTunes cannot access the download file. Disable antiviruses and firewalls.
- error 8008, -50, -5000, -42023
iTunes cannot restore the file download session Clear the contents of the "iTunes Media/Downloads" folder in the iTunes folder
- error 8248 Old incompatible plugins are preventing normal operation of iTunes. Remove plugins installed for iTunes until the error stops appearing
- error 9807 iTunes can't contact the digital signature verification server Turn off your firewall and antivirus
- error 9813 Certificates are invalid Keychain Clear the Safari cache (menu "Safari-Reset Safari")
- error -9800, -9812, -9814 Purchase time error in iTunes Store Set the correct date on your computer
- error 9844 This error is usually caused by incorrect firewall settings. During the update and restore process, iTunes needs to connect to Apple resources. Make sure that the following ports are open on your computer and that you have access to the listed servers: port 80; port 443; phobos.apple.com, albert.apple.com, gs.apple.com, edgesuite.net, evintl-ocsp.verisign.com, evsecure-ocsp.verisign.com.
- error 11222 Access to iTunes services is blocked Disable the firewall
- error 13001 Irreversible damage to the iTunes library file Delete the iTunes Library file and files with the itdb extension in the iTunes folder
- error 13014, 13136
Other processes are preventing iTunes from working properly Restart your computer, turn off your firewall and antivirus, and close any programs running in the background
- error 13019 Library error when trying to sync Check your iTunes library for damaged or incompatible files
- error 20000 iTunes conflicts with the Windows graphical shell. Turn on the default Windows theme.
- errors 20000-20008 This error may indicate a USB communication failure due to a damaged 30-pin dock-to-USB cable, outdated USB drivers or firmware, or interference caused by other USB devices connected to the computer while iTunes is communicating with device with iOS OS. Try restarting your computer and checking using a different USB port to connect.
- error 40265xxxx Errors with numbers 40265xxxx usually occur during the recovery stage from a backup after installing iOS on the device. The problem is solved by restoring and setting up the device as new. Before setting it up as a new device, back up the device you previously created with iTunes.
- error 42408, 42404 These errors may occur when trying to log in using iTunes 9.0.3. Download iTunes 9.1 or later from apple.com/ru/itunes/download/
- error (0x666D743F) Conflict of files with each other at startup. Open Control Panel --> QuickTime In the "Audio" tab, check the box next to Safe mode (waveOut only)
- error 0xE8000022 iOS system files are irreversibly damaged. Restore the firmware.- error 0xE8008001 An attempt was made to install an unsigned application on the device. This is a synchronization error. It is necessary to install the AppSync for 3.0 package in Cydia from the repository http://cydia.haculo.us/ if you have firmware 3.0 installed on your device, or AppSync for 3.1 if firmware 3.1 or 3.1.2 is installed
- error 0xE8000013 iTunes sync error. You need to re-sync with iTunes.- error 0xE8000001 Appears in the Windows operating system. Windows users need to restart the AppleMobileDeviceService.exe service.
" Rename, move or delete the iOS Software (IPSW) file"
iTunes uses IPSW files to restore your iPod or iPhone. If these files are unusable, try deleting, renaming, or moving the files to a different directory. iTunes will then download a new copy of the IPSW file. If deleting the IPSW file does not solve the recovery problem, then the problem may be due to user security software settings or iTunes settings. Creating a new account also downloads new IPSW recovery files to the new user's folder. The folders that may contain IPSW files are listed below.
- Mac OS X -
iPhone - ~/Libraries/iTunes/iPhone Software Updates
iPad - ~/Libraries/iTunes/iPad Software Updates
iPod touch - ~/Libraries/iTunes/iPod Software Updates
- Windows XP -
iPhone - C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
iPad - C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPad Software Updates
iPod touch - C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
- Windows 7 and Windows Vista -
iPhone - C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad - C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch - C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
lexus repair ************After buying an ipod, I always try to download iTunes in Russian or a multilingual version.***i-tunes.org.ua will tell you how and where to download iTunes - all software for iPhone .***
How to fix error 2003 and 2005 when restoring iPhone 5, 6, 7, 8, X and iPad? The error may appear when trying to update the iOS firmware. The error message often appears as "iPhone/iPad/iPod cannot be restored: an unknown error has occurred (2005)."
In this article, we will look at iTunes error 2005, what it is and how you can fix it.
What do errors 2003 and 2005 mean in iTunes when updating an iPhone?
Error 2005 and 2003 usually appears when the iPhone is not updated regularly. This can happen when you download an IPSW file to update your iOS firmware and try to restore the file in iTunes.
This may happen due to a problem with the computer you are connecting your device to; with a USB cable used to connect the device; with hardware or software failure.
Various Ways to Fix 2003 and 2005 Errors in iTunes
Regardless of why errors 2005 and 2003 occur, you can be sure that one of the following solutions will work.
If there is a problem with your USB port, cable, dock, or hub, or if your device turns off during recovery, try connecting USB, and then .
Other methods for solving errors 2005 and 2003
Solution 1: Connect your iOS device:
Disconnect and connect your iOS device to see if it works. Sometimes a simple reconnection is all that is needed to solve the problem.
Solution 2: Restart iTunes:
Make sure you are using the latest version of iTunes. Then try restarting iTunes to see if the error is fixed.
Solution 3: Update iTunes:
Update iTunes to the latest version. If it's already updated, close iTunes and unplug your device. Reconnect it later.
Solution 4: Restart your computer:
Try restarting or using a different computer. This is a very simple method, but sometimes it works.
Solution 5: Check your antivirus:
Check your antivirus software, which may be blocking the iTunes connection. Therefore, if you have installed software (antivirus) and encounter this error, try disabling or uninstalling it temporarily.
Let's check how to fix unknown error 2005/2003 in iTunes:
1. Open TunesCare on your PC/Mac and select Fix All iTunes Issues from the main page.
2. Click "Restore iTunes" to start downloading iTunes discs for recovery.
3. Once the download is complete, the program will automatically continue restoring iTunes.
4. Once iTunes is restored, connect your iPhone/iPad and try restoring iOS again.
Guide to Fix iTunes Error 2003 and 2005
As we already mentioned, the problem could also be software related. To do this, you need a tool like this that is designed to work quickly and efficiently.
Step 1: From the main window, select the Repair option. Then connect your device to your computer using USB cables. The program will detect the device. Click "Start" to continue.
Step 2: Download the firmware for your iOS device, dr.fone will complete the process automatically.
Step 3. Once the firmware is downloaded, the program will continue restoring the device. The entire process will take a few minutes, after which the device will restart normally.
You don't need to try restoring your device in iTunes again after this process since the latest iOS firmware will already be installed.
